Stazioni di sollevamento per acque nere

The Pedrollo SAR40 Lifting Station SAR 40 - TOP 1-GM is suitable for collecting and lifting clear wastewater from domestic drains when gravity discharge is not possible.

Electric Drainage Pump - Suitable For Clear Wastewater
Power (P2): 0.25 kW (0.33 HP)
Max flow rate: 160 l/min - Max head: 6.0 m
40 liter polyethylene tank with non-slip and non-trip lid
Inlets: I 1½" - U 1¼" - S ½" (Male Threaded Connections) - Standard Cable 5 m

Go to the Blackwater Lifting Stations Section to See Related Solutions.

The Pedrollo SAR40 Lifting Station SAR 40 - TOP 2 VORTEX-GM is suitable for collecting and lifting dirty wastewater, with surface or underground installation in residential settings.

Vortex Electric Pump - Suitable For Dirty Wastewater
Power (P2): 0.37 kW (0.50 HP)
Max flow rate: 155 l/min - Max head: 7.0 m
40 liter polyethylene tank with non-walkable, non-streetable lid
Inlets: I 1½" - U 1¼" - S ½" (Male threaded connections) - Standard cable 5 m

Visit the Blackwater Lifting Stations Category for Range Solutions.

The PICO SOL SOL150 lifting station is a one-piece solution with a single submersible pump, designed to collect and relaunch sewage when drains are at a lower elevation than the sewer network or discharge point (basement, underground rooms, etc.). The pump is equipped with a float switch for automatic start/stop.
To see other solutions in the same category, visit: sewage lifting stations.
MAIN SPECIFICATIONS SOL150

Usable volume: 120 L
Configuration: monoblock, single submersible pump
Pump power: 0.3 kW
Impeller type: backward
Flow rate: 10-140 L/min
Head: 6-1 m
Connections: inlet Ø 110 mm | outlet Ø 50 mm
Inspection: Ø 300 mm

The Pedrollo SAR40 Lifting Station SAR 40 - TEX 2 is suitable for collecting and lifting dirty wastewater, ideal when a high maximum flow rate is needed in a compact 40-liter solution.

Vortex Electric Pump - Suitable For Dirty Wastewater.
Power (P2): 0.37 kW (0.50 HP)
Max flow rate: 220 l/min - Max head: 8.3 m
40 liter polyethylene tank with non-slip and non-trip lid
Inlets: I 1½" - U 1¼" - S ½" (Male Threaded Connections) - Standard Cable 5 m

Check out the Lifting Stations For Blackwater to Compare Available Solutions.

The Pedrollo SAR40 Lifting Station SAR 40 - RXm 1-GM is suitable for collecting and lifting clear wastewater from domestic drains, with installation also in basements, garages or underground.

Electric Drainage Pump - Suitable For Clear Wastewater
Power (P2): 0.25 kW (0.33 HP)
Max flow rate: 160 l/min - Max head: 7.0 m
40 liter polyethylene tank with non-slip and non-trip lid
Inlets: I 1½" - U 1¼" - S ½" (Male Threaded Connections) - Standard Cable 5 m

Also explore the Blackwater Solutions available on Comid.com.

The Pedrollo SAR40 Lifting Station SAR 40 - TRITUS-TX is suitable for collecting and lifting sewage when the sewer system is distant or cannot be reached by gravity.

Single-phase Submersible Electric Pump With Grinder
Power (P2): 0.55 kW (0.75 HP)
Max flow rate: 90 l/min - Max head: 11.5 m
40 liter polyethylene tank with non-slip and non-walkable lid
Inlets: I 1½" - U 1¼" - S ½" (Male Threaded Connections) - Standard Cable 5 m

Discover the Lifting Stations For Blackwater Category at Comid.com.au.

The PICO SOL NSOL150 lifting station is a one-piece system with a single submersible sewage pump, ideal when sewage needs to be pumped back to higher elevations (sewage/sewage). The pump is automatically operated by integrated float switch.
See more solutions on: sewage lifting stations.
NSOL150 MAIN SPECIFICATIONS

Usable volume: 130 L
Configuration: monoblock, single submersible pump
Pump power: 0.3 kW
Impeller type: backward
Flow rate: 20-155 L/min
Head: 6-1 m
Connections: inlet Ø 110 mm | outlet Ø 50 mm
Inspection: Ø 300 mm

The PICO SOL SOL326 lifting station is a one-piece solution with a single submersible pump, designed to collect and relaunch sewage when the discharge is lower than the sewer network or point of delivery (basement rooms, basements, etc.). The pump works automatically via float, reducing manual interventions and improving service continuity.
To compare other available models and volumes, visit: sewage lifting stations.
MAIN SPECIFICATIONS SOL326

Usable volume: 230 L
Configuration: single block, single submersible pump
Pump power: 0.55 kW
Impeller type: backward
Flow rate: 0-300 L/min
Head: 8.5-1 m
Connections: inlet Ø 110 mm | outlet Ø 50 mm
Inspection: Ø 400 mm

The PICO SOL SOL345 lifting station is a one-piece solution with a single submersible sewage pump, suitable when more thrust and reliable automatic management is needed. The built-in float switch starts and stops the pump depending on the level, making the system practical and suitable even in residential settings.
To compare other models: sewage lifting stations.
MAIN SPECIFICATIONS SOL345

Usable volume: 230 L
Configuration: monoblock, single submersible pump
Pump power: 0.75 kW
Impeller type: backward
Flow rate: 0-500 L/min
Head: 10.5-1 m
Connections: inlet Ø 110 mm | outlet Ø 63 mm
Inspection: Ø 400 mm

The Pedrollo SAR100 Lifting Station with TOP 3 electric pump is a compact solution for collecting and lifting domestic sewage when gravity discharge is not possible.

Usage: Drainage (Suitable For Clear Wastewater)
Power (P2): 0.55 kW - 0.75 HP
Max flow rate: 260 l/min - Max head: 10.0 m
Tank: Polyethylene 100 liters (Lid Not Walkable And Not Carriageable)
Power Cable: 10 m (Standard)

Discover the Lifting Stations For Blackwater Category at Comid.com.au.

The Pedrollo SAR100 Lifting Station with TOP 3-VORTEX electric pump is suitable for lifting wastewater in domestic settings, with floor or underground installation.

Usage: Vortex (Suitable For Dirty Wastewater)
Power (P2): 0.55 kW - 0.75 HP
Max flow rate: 170 l/min - Max head: 8.2 m
Tank: 100 liters - Cable 10 m (Standard)

Go to Lifting Stations For Blackwater To Compare Solutions.

The PICO SOL NSOL326 is a one-piece lifting station with a single submersible sewage pump, suitable for releasing sewage back to sewer or systems located at higher elevations. Operation is simplified by the float switch for automatic start/stop.
Learn more in the category: sewage lifting stations.
NSOL326 MAIN SPECIFICATIONS

Usable volume: 175 L
Pump power: 0.55 kW
Impeller: backward
Flow rate: 0-300 L/min
Head: 8.5-1 m
Connections: inlet Ø 110 mm | outlet Ø 50 mm
Inspection: Ø 400 mm

The PICO SOL SOL526 lifting station is a single submersible sewage pump solution with increased useful volume to handle larger accumulations and reduce startup cycles. The integrated float switch enables simple and reliable automatic management.
Compare the full range: sewage lifting stations.
MAIN SPECIFICATIONS SOL526

Usable volume: 305 L
Configuration: single block, single submersible pump
Pump power: 0.55 kW
Impeller type: backward
Flow rate: 0-300 L/min
Head: 8.5-1 m
Connections: inlet Ø 110 mm | outlet Ø 50 mm
Inspection: Ø 400 mm

The PICO SOL SOL545 lifting station is a monoblock solution with a single submersible sewage pump, designed for those who need higher flow rates and reliable automatic operation. The float switch manages levels, making the station ready for use in many civil installations.
See full category: sewage lifting stations.
MAIN SPECIFICATIONS SOL545

Usable volume: 305 L
Configuration: single block, single submersible pump
Pump power: 0.75 kW
Impeller type: backward
Flow rate: 0-500 L/min
Head: 10.5-1 m
Connections: inlet Ø 110 mm | outlet Ø 63 mm
Inspection: Ø 400 mm

The Pedrollo SAR100 Lifting Station with RXm 3 electric pump is designed for lifting domestic sewage with floor or underground installation, in residential settings.

Usage: Drainage (Suitable For Clear Wastewater)
Power (P2): 0.55 kW - 0.75 HP
Max flow rate: 220 l/min - Max head: 11.5 m
Tank: Polyethylene 100 liters - Cable 10 m (Standard)

See the Black Water Solutions Available on Comid.com.

The Pedrollo SAR100 Lifting Station with RXm 3/20 electric pump is a compact solution for lifting domestic sewage, which can be installed in the floor or underground.

Usage: Vortex (Suitable For Dirty Wastewater)
Power (P2): 0.55 kW - 0.75 HP
Max flow rate: 240 l/min - Max head: 9.5 m
Tank: 100 liters - Cable 10 m (Standard)

Discover the category Lifting Stations For Black Water.

The PICO SOL NSOL345 is a sewage lifting station in a monoblock version with a single submersible pump. It is designed to push sewage to higher elevations and handle start/stop automatically via float switch.
Other similar solutions: sewage lifting stations.
MAIN SPECIFICATIONS NSOL345

Usable volume: 175 L
Pump power: 0.75 kW
Impeller: backward
Flow rate: 0-500 L/min
Head: 10.5-1 m
Connections: inlet Ø 110 mm | outlet Ø 63 mm
Inspection: Ø 400 mm

The Pedrollo SAR100 Lifting Station with ZXm 2/30 electric pump is suitable for lifting wastewater in domestic applications when high flow rate is needed in vortex execution.

Usage: Vortex (Suitable For Dirty Wastewater)
Power (P2): 0.55 kW - 0.75 HP
Max flow rate: 320 l/min - Max head: 12.5 m
Tank: 100 liters - Cable 10 m (Standard)

See Lifting Stations For Blackwater at Comid.com.au.