E.SYTANK - TANK LT.480 FOR E.SY BOX

TECHNICAL DATA
Operating range: maximum flow rate 120 l/min, head up
to 65 meters
Pumped liquid: clean, free of solids or abrasive substances, non-viscous,
non-agressive, non-crystallized and chemically neutral.
Liquid temperature range: 40°C
Maximum ambient temperature: 50°C
Maximum capacity: 480 liters
Maximum system pressure: 8 bar
Maximum inlet pressure: max. 6 bar
Mains water inlet pipe size: ¾"
Discharge pipe size: 1"
Overflow pipe connection size: DN 50
Front drain size (undrilled): DN40
Bottom tank drain size (not drilled): DN20

APPLICATION / INSTALLATION EXAMPLES
E.SYTANK is the potable water tank integrated with the E.SYBOX system for storage, disconnection from the mains and water supply in domestic/residential settings
.
E.SYTANK meets the following needs:
- Meeting water needs where the public distribution network is insufficient;
- Disconnection from the mains where pumping systems that draw directly from the distribution network are not allowed to be installed. This is done mainly
to avoid backflow of water into the distribution network and its contamination.
- For use as intermediate tanks in tall buildings to subdivide a pressure booster system into several zones.
E.SYTANK is the solution that complements E.SYBOX by realizing a complete pressurization system in domestic and residential environments with high efficiency
allowing for:
- Significant reduction in overall dimensions;
- Dimensions suitable for passage through cellar doors
- Tank complete with all accessories for quick installation
- Maximum integration and ease of installation of e.sybox with e.sytank
- Recyclable materials
- Materials suitable for drinking water

CONSTRUCTION CHARACTERISTICS
e.sytank is a tank with a capacity of 480 liters net suitable for use with potable water.
It is equipped with a filling valve from the water mains with float with free discharge in accordance with UNI EN 1717 and overflow system of type AG
in accordance with the same standard (UNI EN 1717 "Protection against pollution of drinking water"). The tank is complete with e.sydock, suction pipe with valve
bottom, and delivery piping.
The tank is suitable for fixed installation above ground, and the four slots on the base make it easy to fix it to the ground.
It has on the front wall the possibility of connecting a plug or drain piping with solder or glue pipe. At the rear is at the bottom
access to the under-tub direct drain, if any. Both auxiliary drains are to be drilled.
Maintenance of the system is also easy thanks to the practical inspection cap. The system is modular thanks to the possibility of installing additional tanks
on three sides (side and rear). Nothing is required other than e.sytank, in combination with e.sybox, to ensure proper installation in
residential area.