Electric pumps

Use the filters on the left to select the product that best suits your needs.

If you need help, call us at 081 0900700 or email us at [email protected]

In this section you will find all electric pumps (submersible, submersible, surface, heating, pool and fountain pumps) marketed by Comid, along with the full range of submersible motors, switchboards and accessories.

When you need to move fluids (either horizontally or vertically), what you need is an electric pump. The electric pump-most commonly an electric pump-can be of a variety of types: first of all, submersible or surface. The electropump, which is distinguished by the fact that it is lowered inside the liquid, can be distinguished into submerged electropump for clear water and for black water. The electric submersible pump forclear water is generally lowered into wells for the purpose of moving water that will feed utilities: the main destination of this type of pump is aqueduct use (and therefore for drinking water). Submersible electric pumps for sewage, on the other hand, are intended to be lowered inside cesspools with the purpose of emptying them. In some cases, the centrifugal function of the impeller is coupled with a shredding function, which, in order to avoid blockages of the impeller caused by solid waste (which may happen to be thrown into the toilet: plastic papers, rags) shreds what is sucked in: the shredding pump is, however, recommended only in special cases, which it is good to discuss with your trusted plumber, in order not to end up with a product unnecessarily accessorized. Surface electric pumps, on the other hand, are pumps that are installed outside the compartment (well, tank or vessel) that contains the fluid. These therefore suck in fluids through the piping connected to them.

An additional element that helps us choose the pump best suited to our needs is the performance curve, which identifies the values of flow rate and head. Flow rate indicates the amount of fluid the pump can move in a given time frame (usually expressed in seconds or minutes). Head, on the other hand, indicates the height at which the pump is able to raise the water. The intersection of the two values draws a curve (which is precisely the performance curve of a pump) that tells us for each value of flow rate the relative value of head, and vice versa.

The main brands of submersible and surface electric pumps marketed by Comid are Pedrollo, Lowara, Calpeda, Caprari, Aturia, Dab, and Darf.

Pedrollo, a company based in San Bonifacio, is a manufacturer specializing in submersible electric pumps, known for the quality of its Made in Italy production.
Pedrollo's product catalog is extremely wide: centrifugal electric pumps with open impeller, centrifugal electric pumps, electric pump with peripheral impeller, self-priming multiimpeller electric pumps, self-priming "JET" electric pumps, vertical multistage electric pumps, big-impeller centrifugal electric pumps, submersible motors, submersible electric pumps for dirty water, etc.
Pedrollo boasts some top models (whose prices are in accordance with the production and manufacturing quality guaranteed by the Verona-based company) that benefit from great popularity in the market: the ZXm1a, crm80, Top Multi and other models of the Verona-based company are very popular in the industry.

Lowara submersible electric pumps enjoy great prestige and popularity: prices are generally in line with the excellent workmanship features that the Xylem Group house guarantees. Some of the Lowara models are well known, known even outside the specialized realities to which these products are generally addressed: the Domo 7, the Domo 10 vx b, the Doc 3, and the Scuba (regardless of their horsepower rating: 0.75 hp; 1 hp; 1.5 hp; 2 hp) are particularly popular pumps and generally identified as highly reliable products.
In particular, the Domo series pumps(domo 7, domo 10, domo15 and domo 20) are particularly popular on the web and on various industry forums.

For any further information, please write to us at [email protected] or contact us by phone at 081 0900702

Shipping expected within 7 working days
PEDROLLO F ELECTRIC PUMP - VORTEX VXCm 20/65-F 2HP V.230 - SUBMERGIBLE PUMP FOR HARD WATER - (48SGY9862A1)
Expected shipping within 7 working days
Liquid type: sewage water Uses: domestic, civil, industrial Uses: drainage, slightly dirty water handling, drainage Type: submersible Family: submersible Performance range: Flow rate up to 1200 l/min (72.0 m³/h) Head up to 15 m Use limits: Liquid temperature up to +40 °C
Click on the link to return to the Pedrollo VCX-F-VORTEX Series
€975.76
€1,626.26
€799.80 Excl Taxes
Shipping expected within 7 working days
PEDROLLO ELECTRIC PUMP F - VORTEX VXC 15/65-F 1.5HP V. 400 - SUBMERSIBLE SEWAGE PUMP - (48SGY9861A)
Expected shipping within 7 working days
Liquid type: sewage water Uses: domestic, civil, industrial Uses: drainage, slightly dirty water handling, drainage Type: submersible Family: submersible Performance range: Flow rate up to 1200 l/min (72.0 m³/h) Head up to 15 m Use limits: Liquid temperature up to +40 °C
Click on the link to return to the Pedrollo VCX-F-VORTEX Series
€855.71
€1,426.18
€701.40 Excl Taxes
Shipping expected within 7 working days
PEDROLLO F40/125B V.400 ELECTRIC PUMP - CENTRIFUGAL NORMALIZED - (4FN40125BA)
Expected shipping within 7 working days
Pedrollo F-Series Pumps are used for: water supply, washing systems, pressurization, firefighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.Installation to be carried out indoors or otherwise protected from the weather.
CLICK ON LINK TO RETURN TO PEDROLLO F
€620.74
€1,034.56
€508.80 Excl Taxes
Shipping expected within 7 working days
PEDROLLO Fm40/125B V.230 ELECTRIC PUMP - NORMALIZED CENTRIFUGAL - (4FN40125BA1)
Expected shipping within 7 working days
Pedrollo F-Series Pumps are used for: water supply, washing systems, pressurization, firefighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.Installation to be carried out indoors or otherwise protected from the weather.
CLICK ON LINK TO RETURN TO PEDROLLO F
€647.82
€1,079.70
€531.00 Excl Taxes
Shipping expected within 7 working days
PEDROLLO F40/125C V.400 ELECTRIC PUMP - CENTRIFUGAL NORMALIZED - (4FN40125CA)
Expected shipping within 7 working days
Pedrollo F-Series Pumps are used for: water supply, washing systems, pressurization, firefighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.Installation to be carried out indoors or otherwise protected from the weather.CLICK ON LINK TO RETURN TO PEDROLLO F
€604.63
€1,007.72
€495.60 Excl Taxes
Shipping expected within 7 working days
PEDROLLO ELECTROPOM Fm40/125C V.230 - CENTRIFUGAL NORMALIZED - (4FN40125CA1)
Expected shipping within 7 working days
Pedrollo F-Series Pumps are used for: water supply, washing systems, pressurization, firefighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.Installation to be carried out indoors or otherwise protected from the weather.
CLICK ON LINK TO RETURN TO PEDROLLO F
€631.72
€1,052.86
€517.80 Excl Taxes
Shipping expected within 7 working days
ELECTRIC TRANSFER PUMP ROVER 40 HP.1 V.220 - (ROV110000CE)
Expected shipping within 7 working days
It is the liquid ring self-priming pump with star geometry impeller, equipped with two directions of rotation as standard, with high-efficiency motor calculated to operate in continuous duty. The special hydraulic geometry allows the pump to operate even in the presence of air bubbles in the suction liquid.
€211.83
€325.89
€173.63 Excl Taxes
Shipping expected within 7 working days
ELECTRIC TRANSFER PUMP ROVER 35 CE HP0.9 V.220 - (ROV120000CE)
Expected shipping within 7 working days
It is the liquid ring self-priming pump with star geometry impeller, equipped with two directions of rotation as standard, with high-efficiency motor calculated to operate in continuous duty. The special hydraulic geometry allows the pump to operate even in the presence of air bubbles in the suction liquid.
€192.66
€296.40
€157.92 Excl Taxes
Shipping expected within 7 working days
E/PUMP TO TRANSFER ROVER BE-M50 HP.3 V.220 - (ROV270000)
Expected shipping within 7 working days
It is the liquid ring self-priming pump with star geometry impeller, equipped with two-way rotation as standard, with high-efficiency motor calculated to operate in continuous duty.
€530.58
€816.28
€434.90 Excl Taxes
Shipping expected within 7 working days
E/PUMP TO TRANSFER ROVER 25 HP.0.8 V.220 - (ROV540000CE)
Expected shipping within 7 working days
It is the liquid ring self-priming pump with star geometry impeller, equipped with two-way rotation as standard, with high-efficiency motor calculated to operate in continuous duty.
€97.67
€150.27
€80.06 Excl Taxes
Shipping expected within 7 working days
E/PUMP ROVER GEAR PUMP NOVAX G.20 12V HP 0.6 - (ROV972000P)
Expected shipping within 7 working days
"G" series gear pumps have been developed for transferring all commonly used nonaggressive viscous liquids whose viscosity at 40°C is contained between 1st Engler (example: water, diesel oil. Intermittent service only to avoid overheating) and 7th Engler (engine oil SAE 30 or transmission oil SAE 80, continuous service).
€219.05
€337.00
€179.55 Excl Taxes
Shipping expected within 7 working days
E/PUMP FOR TRANSFERRING ROVER MARINA 20-12 HP.0.5 - (ROVMARINA20-12)
Expected shipping within 7 working days
"G" series gear pumps have been developed for transferring all commonly used nonaggressive viscous liquids whose viscosity at 40°C is contained between 1st Engler (example: water, diesel oil. Intermittent service only to avoid overheating) and 7th Engler (engine oil SAE 30 or transmission oil SAE 80, continuous service). Liquids must be clean, with no suspended matter. They are suitable for transferring water, wine, olive oil, milk or diesel oil, synthetic oil, mineral oil.
€191.35
€294.39
€156.85 Excl Taxes
Shipping expected within 7 working days
E/PUMP FOR TRANSFERRING ROVER MARINA 20-24 HP.0.5 - (ROVMARINA20-24)
Expected shipping within 7 working days
"G" series gear pumps have been developed for transferring all commonly used nonaggressive viscous liquids whose viscosity at 40°C is contained between 1st Engler (example: water, diesel oil. Intermittent service only to avoid overheating) and 7th Engler (engine oil SAE 30 or transmission oil SAE 80, continuous service). Liquids must be clean, with no suspended matter. They are suitable for transferring water, wine, olive oil, milk or diesel oil, synthetic oil, mineral oil.
€191.35
€294.39
€156.85 Excl Taxes

I servizi che fanno la differenza

24/48H shipping

Ultra-fast shipping with express courier, to offer excellent and timely service to our customers.

Secure payments

We ensure maximum security in online payments through advanced transaction protection systems for the peace of mind of our customers.

Pay in 3 installments with PayPal

Choose the convenience of paying in three interest-free installments with PayPal. An option designed for your financial flexibility.