Electric pumps

Use the filters on the left to select the product that best suits your needs.

If you need help, call us at 081 0900700 or email us at [email protected]

In this section you will find all electric pumps (submersible, submersible, surface, heating, pool and fountain pumps) marketed by Comid, along with the full range of submersible motors, switchboards and accessories.

When you need to move fluids (either horizontally or vertically), what you need is an electric pump. The electric pump-most commonly an electric pump-can be of a variety of types: first of all, submersible or surface. The electropump, which is distinguished by the fact that it is lowered inside the liquid, can be distinguished into submerged electropump for clear water and for black water. The electric submersible pump forclear water is generally lowered into wells for the purpose of moving water that will feed utilities: the main destination of this type of pump is aqueduct use (and therefore for drinking water). Submersible electric pumps for sewage, on the other hand, are intended to be lowered inside cesspools with the purpose of emptying them. In some cases, the centrifugal function of the impeller is coupled with a shredding function, which, in order to avoid blockages of the impeller caused by solid waste (which may happen to be thrown into the toilet: plastic papers, rags) shreds what is sucked in: the shredding pump is, however, recommended only in special cases, which it is good to discuss with your trusted plumber, in order not to end up with a product unnecessarily accessorized. Surface electric pumps, on the other hand, are pumps that are installed outside the compartment (well, tank or vessel) that contains the fluid. These therefore suck in fluids through the piping connected to them.

An additional element that helps us choose the pump best suited to our needs is the performance curve, which identifies the values of flow rate and head. Flow rate indicates the amount of fluid the pump can move in a given time frame (usually expressed in seconds or minutes). Head, on the other hand, indicates the height at which the pump is able to raise the water. The intersection of the two values draws a curve (which is precisely the performance curve of a pump) that tells us for each value of flow rate the relative value of head, and vice versa.

The main brands of submersible and surface electric pumps marketed by Comid are Pedrollo, Lowara, Calpeda, Caprari, Aturia, Dab, and Darf.

Pedrollo, a company based in San Bonifacio, is a manufacturer specializing in submersible electric pumps, known for the quality of its Made in Italy production.
Pedrollo's product catalog is extremely wide: centrifugal electric pumps with open impeller, centrifugal electric pumps, electric pump with peripheral impeller, self-priming multiimpeller electric pumps, self-priming "JET" electric pumps, vertical multistage electric pumps, big-impeller centrifugal electric pumps, submersible motors, submersible electric pumps for dirty water, etc.
Pedrollo boasts some top models (whose prices are in accordance with the production and manufacturing quality guaranteed by the Verona-based company) that benefit from great popularity in the market: the ZXm1a, crm80, Top Multi and other models of the Verona-based company are very popular in the industry.

Lowara submersible electric pumps enjoy great prestige and popularity: prices are generally in line with the excellent workmanship features that the Xylem Group house guarantees. Some of the Lowara models are well known, known even outside the specialized realities to which these products are generally addressed: the Domo 7, the Domo 10 vx b, the Doc 3, and the Scuba (regardless of their horsepower rating: 0.75 hp; 1 hp; 1.5 hp; 2 hp) are particularly popular pumps and generally identified as highly reliable products.
In particular, the Domo series pumps(domo 7, domo 10, domo15 and domo 20) are particularly popular on the web and on various industry forums.

For any further information, please write to us at [email protected] or contact us by phone at 081 0900702

Available Now
PEDROLLO TURBOm 4A CENTRIFUGAL BIGIRING ELECTROPUMP | 1.5 kW - 2 HP | 230V 50Hz - (452T040AA1)
Product Available in Stock - Shipment in 24/48h



Model: Pedrollo TURBO Series (Centrifugal twin-impeller electric pumps for clean water)
Use: Pumping clean water for domestic, civil and industrial use - Ideal for pressurization systems with autoclaves and tanks, mains pressure boosting and irrigation.
Performance: Flow rate up to 200 l/min (12 m³/h) - Head up to 68 m.
Operating limits: Suction height up to 7 m - Liquid temperature from -10 °C to +90 °C - Ambient temperature up to +40 °C - Maximum pressure in the pump body 10 bar.
Power supply / Absorption: Single-phase 230 V - 7.0 A (TURBOm 4B, 6C) - 10.0 A (TURBOm 4A, 6B) - 12.0 A (TURBOm 6A) - Three-phase 230/400 V - 2.8÷8.7 A according to model.
Power (P2): 1.1 kW (1.5 HP) to 2.2 kW (3 HP) depending on version.
Materials: Cast iron pump body and presser - AISI 304 stainless steel impellers - AISI 431 shaft - Graphite/ceramic/NBR mechanical seal - NBR gaskets.
Technology: High-efficiency double-impeller electric pumps with optimized hydraulic redesign - +40 % flow rate, +9 % efficiency, -30 % noise - High-efficiency IE2 (single-phase) and IE3 (three-phase) motors - S1 continuous operation.
Features: Inverter-ready motor - IPX4 protection (optional IPX5) - Built-in thermal motor protector in single-phase models - Possibility of installation in pressure units with inverters.
Installation: To be placed in a dry, well-ventilated environment - Hydraulic connection via ISO 228/1 threaded ports - Use with clean water or liquids compatible with construction materials.

Suitability for use and performance curves according to the manufacturer's data sheet.
Warranty: 2 years
CLICK TO RETURN TO THE SURFACE ELECTRIC PUMPS
€423.10
€705.16
€346.80 Excl Taxes
Available Now
PEDROLLO FAMILY 0.70HP VORTEX SUBMERSIBLE ELECTRIC PUMP | 230V - 50HZ | CABLE 10 METERS - (48SDFY22A1)
Product Available in Stock - Shipped in 24/48h



Model: FAMILY (VORTEX stainless steel submersible electric pump for dirty water)
Use: Draining and lifting sewage with solids up to Ø 30 mm, ideal for domestic use in automatic fixed installations.
Performance: Flow rate up to 250 l/min (15 m³/h) - Head up to 10 m.
Limits of use: Maximum immersion 5 m (with suitable cable) - Liquid temperature up to +40 °C - Minimum immersion for continuous service: 160 mm.
Power supply / Electrical data: Single-phase 230 V - 50 Hz - P2 0.50 kW (0.70 HP) - Rated current 3.0 A - Insulation Class F - Protection IPX8.
Materials: Pump body, base, motor jacket and VORTEX impeller in AISI 304 stainless steel - Motor shaft in AISI 431.
Seal: STA-12R double mechanical seal (Ceramic/Graphite/NBR) with interposed oil chamber.
Equipment: 5 m H07 RN-F cable with Schuko plug - Built-in float switch - Ø 50 mm hose holder.
Connections/Solids passage: 1½" port - Solid body passage up to Ø 30 mm.
Approximate dimensions: a 70 mm - b 93 mm - c 140 mm - H 333 mm - h1 68 mm - Weight 7.0 kg.
Notes: Italian patent no. IT0001428923.


Warranty: 2 years
FREE SHIPPING
CLICK TO RETURN TO ELECTRIC PUMPS
€204.45
€358.68
€167.58 Excl Taxes
Available Now
CALPEDA BCM 22/A CENTRIFUGAL ELECTRIC PUMP MONOBLOC BRONZE IMPELLER V.230 - (7171007100002)
Product Available in Stock - Shipped in 24h
BRONZE IMPELLER VERSION - The bronze impeller offers excellent corrosion resistance, making it ideal for salt water, aggressive fluids and marine applications. It provides high durability, good cavitation resistance and excellent mechanical strength over time. It is ideal for industrial and water treatment pumps, ensuring reliability.
Calpeda's C-series monobloc centrifugal pumps are complete with open impeller.
Click on the link to return to the category of CALPEDA C and BC electric pumps
€710.80
€1,045.30
€582.62 Excl Taxes
Available Now
ELETTROPOMPA MC 40/65 4HP 380-415/50 3F (MC 40/70) - (48SGM9864A)
Prodotto Disponibile a Magazzino - Spedito in 24h\48h
L'elettropompa sommersa Pedrollo MC40/65 è una pompa in ghisa ad alto spessore equipaggiata con girante BICANALE in acciaio inox AISI 304 microfuso, progettata per il drenaggio di acque di scarico e fognarie, acque miste a fango, acque freatiche e acque reflue con corpi solidi in sospensione fino a Ø 65 mm. Il motore in bagno d'olio garantisce funzionamento continuo, prestazioni elevate e durata senza precedenti, indicata per condomini, edifici pubblici, industrie, autosilo e parcheggi sotterranei.

Potenza: 3 kW – 4 HP
Alimentazione: trifase 400 V – 50 Hz
Corrente assorbita: 7,5 A (400 V)
Portata massima: fino a 1600 l/min (96.0 m³/h)
Prevalenza massima: fino a 17 m
Girante: BICANALE, passaggio solidi fino a Ø 65 mm
Bocca di mandata: DN 80 – 3"
Profondità d'impiego: fino a 10 m
Immersione min. (serv. continuo): 360 mm
Cavo alimentazione: 10 m tipo H07 RN-F
Peso: 50,0 kg

Clicca sul link per tornare a Pedrollo MC BICANALE
€1,007.23
€1,678.72
€825.60 Excl Taxes

I servizi che fanno la differenza

24/48H shipping

Ultra-fast shipping with express courier, to offer excellent and timely service to our customers.

Secure payments

We ensure maximum security in online payments through advanced transaction protection systems for the peace of mind of our customers.

Pay in 3 installments with PayPal

Choose the convenience of paying in three interest-free installments with PayPal. An option designed for your financial flexibility.