CAPRARI ELECTRIC PUMP MAT16T2 V.400 KW1.6

MAT series submersible electric pumps, equipped with treated stainless steel grinders, are particularly suitable for dealing with the problems of lifting sewage containing solids or fibrous matter from individual homes, small urban agglomerations, campgrounds, hotels, service areas, etc., not directly connected to the sewer system. The reduction of solids into small fragments and the high pressure generated by the pumps enable the overcoming of considerable height differences and/or long distances by employing small-diameter pipes without danger of clogging. These electric pumps can be supplied, upon request, complete with a baseplate for automatic coupling.

LIMITS OF USE

- max. temperature of pumped liquid = 40°C

- max. immersion depth = 20 m

- PH of the pumped liquid: 6 ÷ 10

- supply voltages and relative permissible variation from rated voltage:

- single-phase: 220 V - 230 V ±6% standard 230 V

- 240 V ±6% on request

- three-phase: 400 V ±10% (380-400-415) standard 230 V ±10% (220-230-240) on request

- other voltages with ±5% on request

- maximum unbalance allowed on the absorbed current: 5%

- consult our technical offices in the presence of a density higher than 1 kg/dm3 and/or a viscosity higher than 1 mm2 /s (1 cSt)

- the electric pump generates a sound pressure level below 70 dB(A).

INSTALLATION

The electric pump is installed in the sump and can be used:

- connected to flexible piping - connected to rigid piping directly to the threaded delivery port

- automatic control by special equipment is possible.

CONSTRUCTION

- cast iron open impeller with stainless steel grinder

- front mechanical seal

- amperometric thermal protection (excluding model MAT16M2) incorporated as standard in single-phase models

- capacitor for single-phase models inserted in special external container and connected to the end of the power cable

- oil-bath motor with insulation class F and IP68 degree of protection

- stainless steel screws and nuts.