Pop up turbine sprinkler t 3/4f

Main features:
- On-board anti-waterhammer valve;
- On-board anti-drainage valve (you need to turn under over the anti-waterhammer valve) prevents runoff
up to 3.7 m.w.g.
- Vandal-proof "double thickness" rubber cover
- Technological sealing seal: thanks to the double lip with water pressure it "swells" and goes into
seal on the piston; as the pressure goes down it "deflates" ensuring the piston descends. Thanks to
this peculiarity, the piston can already escape with a minimum pressure of 1.4 bar. It also does not suffer
problems due to impurities or sand because by releasing the seal, it ensures that the piston does not buckle or
become damaged.
- The piston is equipped with a perfectly calibrated clutch: makes it easy to rotate the same, but
prevents its accidental rotation or caused by hydraulic rotation
- Also available with Stainless Steel piston
- The screw that holds the nozzle, if lowered, can reduce the throw by 25%
- Flow rates from 3 to 56 L/min
- 14 interchangeable nozzles including the taut jet type and the Flow + type (increased throw and flow rate)
- Adjustable rotation from 40° to 360° or available in 360° continuous rotation version
- "arc dwell" system: the rotating part of the nozzle-holding piston at the end of the stroke pauses to stabilize the jet
and compensate for the swerving effect on the immediate restart of the sprinkler, thus it is guaranteed
the uniformity of distribution even along the edges
- Adjustment of the 'working angle without the use of tools.
- The T3 sprinkler is manufactured exclusively from virgin material
- Technological filter (used in hemodialysis) to protect the pond compartment containing the mechanism of
rotation