SURFACE ELECTRIC PUMPS

Use the filters on the left to select the product that best suits your needs.

If you need help, call us at 081 0900700 or email us at shop@comid.it

In this section you will find all the Surface Electric Pumps marketed by Comid, produced by the most important brands in the industry: Aturia, Calpeda, Lowara, Pedrollo.

Show Less

Subcategories

PEDROLLO PK SERIES ELECTRIC PUMPS WITH PERIPHERAL IMPELLER

They are recommended for pumping clean water without abrasive particles and liquids that are chemically nonaggressive to the pump's constituent materials.
Because of their reliability, simplicity of use, and cost-effectiveness, they are suitable for domestic use and in particular for water distribution in conjunction with small autoclave tanks, for irrigation of vegetable gardens and orchards.
Installation is to be carried out indoors or otherwise protected from the weather.

ROVER ELECTRIC TRANSFER PUMPS

Rover transfer pumps are suitable for gentle transfer of filtered liquids in AGRICULTURE, ENOLOGY, NAUTICAL, and GARDENING. Liquids to be transferred must be neutral and clean, or contain a percentage of solids (0.2-0.5% max.) having hardness and particle size characteristics such that the internal shimming surfaces of the pump will not wear out.

Examples of liquids are: WATER, WINE, MILK, MUST, LIQUID DETERGENTS, DIESEL OIL, OIL, GLYCOL

PEDROLLO MULTI IMPELLER CENTRIFUGAL ELECTRIC PUMPS SERIES 3-4CP

They are recommended for pumping clean water and liquids that are chemically non-aggressive to the pump's constituent materials.
Because of their reliability and noiselessness, they find wide use in the domestic sector and particularly for water distribution in coupling with small or medium autoclave tanks, for irrigation of vegetable gardens or gardens, etc. Installation is to be carried out indoors or otherwise protected from the weather.

PEDROLLO MULTI IMPELLER CENTRIFUGAL ELECTRIC PUMPS SERIES 2-5CR

They are recommended for pumping clean water and liquids that are chemically non-aggressive to the pump's constituent materials.
Because of their reliability and quiet operation, they are widely used in the domestic sector and in particular for water distribution in conjunction with small or medium autoclave tanks, for irrigation of vegetable gardens or gardens, etc.

JSW1-2 JET SERIES SELF-PRIMING ELECTRIC PUMPS

Le Pedrollo electric pumps of the JSW series are recommended for pumping clean water and liquids that are chemically non-aggressive to the pump's constituent materials.
JSW self-priming pumps are designed to suck water even in the presence of air mixed with the pumped liquid.

FEATURES

Liquid type: clean water

Uses: domestic, civil

Uses: water supply, firefighting systems, washing systems, pressurization systems, irrigation, transferring tanks

Type: surface

Family: self-priming

Performance range:

Flow rate up to 85 l/min (5.1 m³/h)
Head up to 70 m

Limits of use:

Liquid temperature up to +40 °C
Ambient temperature from -10 °C up to +40 °C

- Manometric suction height up to 9 m (HS)
- Max pressure in pump body 6.5 bar
- Continuous duty S1

PEDROLLO JET JSW3 SERIES SELF-PRIMING ELECTRIC PUMPS

Pedrollo's JSW 3 series self-priming pumps are recommended for pumping clean water and liquids that are chemically nonaggressive to the pump's constituent materials.
Because of their reliability and ease of use, they are recommended for domestic use, especially for water distribution in conjunction with small or medium-sized autoclave tanks, for irrigation of vegetable gardens and gardens, etc.

PEDROLLO CENTRIFUGAL ELECTRIC PUMPS HF SERIES

They are recommended for use in civil and agricultural environments. The high efficiencies that can be achieved and the possibility of continuous use make the use of these electric pumps advantageous for run-of-river and sprinkler irrigation, for drawing water from lakes, rivers, wells or for a wide variety of industrial uses characterized by the need to realize considerable flow rates in relation to medium-low heads. Installation is to be carried out indoors or otherwise protected from the weather.

PEDROLLO SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS CP SERIES

Pedrollo's CP Series Electric Pumps are recommended for pumping clean water without abrasive particles and liquids that are chemically nonaggressive for the pump's constituent materials. Because of their reliability and ease of use, they find wide use in the domestic and civil sectors, particularly for water distribution in coupling with small and medium-sized self-calving tanks, for decanting, and for irrigation of vegetable gardens and gardens. Installation is to be carried out indoors or otherwise protected from the weather.

Features

Liquid type: clean water

Uses : domestic, civil

Uses: irrigation, cooling systems, air conditioning systems, water supply, tank transfer, pressurization systems

Type: surface

Family: centrifuges

Performance range:

Flow rate up to160 l/min (9.6 m/h)
Head up to56 m

Usage limits:

Liquid temperature from -10 C up to +90 C
Ambient temperature up to +40 C

Manometric suction height up to 7 m
Max pressure in the pump body:
6 bar for CP 100-130-132-150-158
10 bar for CP 170-190-200
Continuous duty S1

PEDROLLO SERIES 2CP BIG IMPELLER CENTRIFUGAL ELECTRIC PUMPS

Pedrollo 2 CP electric pumps are recommended for pumping clean water and liquids that are chemically non-aggressive for the pump's constituent materials.
Their high efficiency and adaptability to a wide variety of applications, including abnormal ones, make them an ideal choice in the domestic, civil, and industrial sectors; particularly for water distribution in coupling with autoclave tanks, for increasing pressure in the network, and for fire-fighting units.
Installation is to be carried out indoors or otherwise protected from the weather.

PEDROLLO PLURIJET SELF-PRIMING MULTI-IMPELLER ELECTRIC PUMPS

PLURIJET self-priming pumps are designed to suck water even in the presence of air mixed with the pumped liquid. Due to their quiet operation, reliability and low power consumption, they are recommended for domestic and civil use, especially for pressurization and distribution of water in conjunction with autoclave tanks, rainwater recovery, irrigation systems, etc.
They are recommended for sucking clean water even in the presence of air mixed with the pumped liquid and liquids that are chemically non-aggressive to the pump's constituent materials.
They are to be installed indoors or otherwise protected from the weather.

CALPEDA MXV SERIES VERTICAL AXIS MULTISTAGE ELECTRIC PUMPS

One-piece vertical multistage pumps with suction and delivery ports of the same diameter and arranged on the same axis (in-line).

All parts in contact with the liquid, including the heads, are made of chrome-nickel stainless steel.

Corrosion-resistant guide bushes lubricated by the pumped liquid.

CENTRIFUGAL ELECTRIC PUMPS WITH OPEN IMPELLER LOWARA CO SERIES

Lowara CO Series - Centrifugal electric pumps with threaded ports and open impeller

These electric pumps combine the advantages of open impeller with those of AISI 316 stainless steel. They are suitable for handling moderately aggressive liquids with suspended solid particles.

Specifications

Flow rate: up to 54 m³/h
Head: up to 24 m
Power supply: single and three-phase 50 and 60 Hz
Power: from 0.37 kW up to 3 kW
Maximum pressure: 8 bar
Liquid temperature: from -10 °C to 120 °C
Free passage: up to 20 mm

LOWARA ELECTRIC DOUBLE-IMPELLER PUMPS CA SERIES

Lowara CA Series - Centrifugal electric pumps with stainless steel threaded ports.

In this section you will find a wide range of electric pumps intended for both domestic and industrial use. Lowara's CA series pumps are available in single-impeller (CEA) and double-impeller (CA) versions. Available on request are "V" versions with FPM elastomers for temperatures up to 110°C and "N" versions completely in AISI 316 stainless steel.

Specifications

Flow rate: up to 31 m³/h
Head: up to 62 m
Power supply: single and three-phase 50 and 60 Hz
Power: from 0.37 kW up to 3 kW
Maximum pressure: 8 bar
Liquid temperature from -10 °C to 110 °C

PEDROLLO VERTICAL MULTISTAGE ELECTRIC PUMPS MK SERIES

Le Pedrollo MK Vertical Multistage Pumps are suitable for a wide variety of applications, ideal for domestic, civil, and industrial sectors, especially for water distribution in coupling with autoclave tanks, increasing pressure in the network. They are recommended for pumping clean water and chemically non-aggressive liquids.

ATURIA-MARELLI AQUAFIT NORMALIZED CENTRIFUGES

Single-impeller centrifugal pump coupled via lantern coupling to asynchronous motor in closed construction with external ventilation. Pump housing with feet for all pumps with motor up to size 132; beyond , motor in B3/B5 form and pump housing without feet. Sealing on shaft of mechanical type. Catalog and nameplate operating characteristics are for continuous service clean water, (specific gravity=1000 Kg/m3 ) with maximum suction height of 2 m.c.a.

PEDROLLO CENTRIFUGAL NORMALIZED ELECTRIC PUMPS F SERIES

Used for: water supply, washing systems, pressurization, fire fighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation is to be carried out indoors or otherwise protected from the weather.

GRUNDFOS MULTISTAGE PUMPS

Compact, reliable, horizontal, multistageGrundfos centrifugalpumps with radial suction port and
discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and
discharge parts are made of cast iron. The mechanical seal is a special type O-ring, unbalanced. The
piping connection is by Whitworth internal threads, Rp (ISO 7/1).
The pumps are equipped with a base-mounted, air-cooled, 1-phase asynchronous motor.

Liquid:

Pumped liquid: Water

Liquid temperature range: -20 ... 90 °C

Liquid temperature during operation: 20 °C

Density: 998.2 kg/m³

Technical:

Speed per pump data: 2900 rpm

Flow rate: 3.1 m³/h

Head: 34.7 m

Primary mechanical seal: AVBE

Approvals on nameplate: CE,WRAS,ACS,TR,EAC

Curve tolerance: ISO9906:2012 3B

Materials:

Pump body: cast iron

EN-JL1030

ASTM 30 B

Impeller: Stainless steel

DIN W.-Nr. 1.4301

AISI 304

Rubber: EPDM

Installation:

Max ambient temperature: 55 °C

Max operating pressure: 10 bar

Max pressure at cited temperature: 6 bar / 90 °C

10 bar / 40 °C

Standard flange: WHITWORTH RP threading

Pump suction: Rp 1

Pump discharge: Rp 1

Electrical data:

Motor type: 71B

IE efficiency class: NA

Power - P2: 0.5 kW

Mains frequency: 50 Hz

Voltage: 1 x 220-240 V

Service factor: 1

Current: 3.1-2.8 A

Starting current: 530 %

Rated speed: 2730-2740 rpm

Protection class (IEC 34-5): IP55

Insulation class (IEC 85 ): F

Others:

Minimum Efficiency Index, MEI ≥: 0.7

Net weight: 12.5 kg

Gross weight: 15 kg

SURFACE ELECTRIC PUMP ACCESSORIES

PEDROLLO F4 NORMALIZED CENTRIFUGAL ELECTRIC PUMPS

Pedrollo F4 Centrifugal Pumps are suitable for: water supply, washing systems, pressurization, firefighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation is to be carried out indoors or otherwise protected from the weather.

JCR2 JET SERIES SELF-PRIMING ELECTRIC PUMPS

JCR self-priming pumps are designed to draw water even in the presence of air mixed with the pumped liquid. Because of their reliability and ease of use, they are recommended for domestic use, especially for water distribution in conjunction with small or medium-sized autoclave tanks, for irrigation of vegetable gardens and orchards,
etc.
They are recommended for pumping clean water and liquids that are chemically non-aggressive to the pump's constituent materials.
Installation is to be carried out indoors or otherwise protected from the weather.

ALPHA OPEN IMPELLER SELF-PRIMING ELECTRIC PUMPS

Self-priming open impeller electric pumps suitable for sucking water even in the presence of air mixed with pumped liquid.

CAPRARI HV SERIES VERTICAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMP

Vertical multistage centrifugal surface electric pumps. Quiet and efficient, they can be used in water supply, washing, firefighting, air conditioning and cooling systems, small irrigation, and general pressure elevation. Machines that comply with Directive 2009/125/EC (EcoDesign - ErP).

CAPRARI CENTRIFUGAL MULTISTAGE VERTICAL ELECTRIC PUMPS CVX SERIES

The new CVX range of vertical multistage stainless steel electric pumps features in-line suction and delivery and energy-efficient motors.
Product competitiveness, combined with the high quality and reliability that distinguish the entire Caprari range, is the most obvious value encapsulated in the new CVX series. Machines that comply with Directive 2009/125/EC (EcoDesign - ErP).

PEDROLLO MULTI IMPELLER CENTRIFUGAL ELECTRIC PUMPS SERIES 3-7 CR

They are recommended for pumping clean water and liquids that are chemically nonaggressive to the pump's constituent materials.
Because of their reliability and noiselessness, they are widely used in the domestic sector and in particular for water distribution in coupling with small or medium autoclave tanks, for irrigation of vegetable gardens or gardens, etc.
Installation is to be carried out indoors or otherwise protected from the weather

CALPEDA C AND BC SERIES MONOBLOC CENTRIFUGAL ELECTRIC PUMPS

Close-coupled centrifugal electric pumps with open impeller for boat air conditioning system.
Backward (vortex) impeller for type C 16/1E.
C: version with cast iron pump body and fitting.
B-C: version with bronze pump body and fitting.
Bronze pumps are supplied fully painted.

SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS LOWARA BG

Lowara BG monobloc self-priming centrifugal electric pumps with built-in ejector system are designed to maintain priming even in the presence of dissolved gases in water. Robust stamped stainless steel construction ensures durability, light weight and excellent efficiency.

The "Garden" version of the pumps is available with a handle and switch built into the terminal box, offering greater convenience and ease of use.

These electric pumps are suitable for a wide range of sectors, including civil, agricultural and industrial. They find applications in water supply, pressurization, irrigation, washing, rainwater harvesting, swimming pools and fountains.

TheBG series of these pumps offers the following features:

- Flow rate up to 4.2 m3/h.

- Head up to 53 m.

- Maximum operating pressure of 8 bar (PN 8).

- Maximum suction height of 8 m.

- Temperature of pumped liquid: -10°C to +40°C.

- Maximum ambient temperature: +40°C.

- Motor power: 0.37 kW to 1.1 kW.

The pump motor is short-circuit cage type, closed to external ventilation. It has an IP55 degree of protection and class 155 (F) insulation. The performance of the motor complies with EN 60034-1. The maximum ambient temperature is +40°C.

Standard voltages for the different versions are:

- Single-phase version: 220-240 V, 50 Hz, with built-in automatic reset overload protection.

- Three-phase version: 220-240/380-415 V, 50 Hz, with user-operated overload protection.

These electric pumps offer reliable performance and are ideal for meeting the needs of various applications efficiently and durably.

LOWARA e-HM SERIES MULTIPURPOSE CENTRIFUGAL ELECTRIC PUMPS

Horizontal multistage centrifugal electric pump with threaded ports, technopolymer impellers, AISI 304 stainless steel pump body and diffusers

Uses:

The e-HM series can be installed in both single private dwellings, small/medium residential buildings for water supply and pressurization systems such as:

Water supply
Rainwater harvesting
Pressurization
Irrigation

DAB JETCOM SERIES SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS

DAB JETCOM self-priming centrifugal pumps with excellent suction capabilities even in the presence of air bubbles. Suitable for use for water with small sandy impurities. Employed for water supply in domestic systems. Suitable for small agriculture and gardening, limited industrial services and where self-priming function is required. Technopolymer pump body

Sort by:

View

Shipping expected within 7 working days

E/ PUMP PEDROLLO 2CP40/200B 380-400/660-690/50 - (452CT420BE)

Out of Stock - Available in 10 Days

Le Pedrollo 2CP electric pumps are recommended for pumping clean water and liquids that are chemically non-aggressive to the pump's constituent materials. Their high efficiencies and adaptability to a wide variety of applications, including abnormal ones, make them an ideal choice in the domestic, civil, and industrial sectors.
Click on the link to return to the category of Pedrollo 2CP electric pumps

€1,541.59

€2,569.32

€1,263.60 Excl Taxes

PEDROLLO F40/250C ELECTRIC PUMP 380-415/660-

Shipping expected within 7 working days

PEDROLLO F40/250C ELECTRIC PUMP V.380/415/660 - CENTRIFUGAL NORMALIZED - (4FN40250CE)

Out of Stock - Available in 10 Days

Pedrollo F-Series Pumps are used for: water supply, washing systems, pressurization, firefighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.Installation to be carried out indoors or otherwise protected from the weather.
CLICK ON LINK TO RETURN TO PEDROLLO F

€1,581.12

€2,635.20

€1,296.00 Excl Taxes

PEDROLLO F50/250D ELECTRIC PUMP 380-415/660-

Shipping expected within 7 working days

ELECTRIC PUMP PEDROLLO F50/250D 380-415/660- - (4FN50167E)

Out of Stock - Available in 10 Days

Le Pompe Pedrollo della Serie F sono utilizzate per: approvvigionamento idrico, impianti di lavaggio, pressurizzazione, impianti antincendio, irrigazione, industria, circolazione acqua in impianti di climatizzazione, agricoltura.L'installazione da effettuarsi in luoghi chiusi o comunque protetti dalle intemperie.
CLICCA SUL LINK PER TORNARE ALLEPEDROLLO F

€1,573.80

€2,623.00

€1,290.00 Excl Taxes

ELECTRIC PUMP ATURIA AQF 150x125x200X KW 9.2 V.380 4P

Shipping expected within 7 working days

E/ PUMP ATURIA AQF 150x125x200X KW 9.2 V.380 4P - (150X125X200X)

Out of Stock - Available in 10 Days

PRODUCT IN STOCK

€5,409.48

€9,015.80

€4,434.00 Excl Taxes

E/PUMP ATURIA AQF 125x100x250X KW 9.2 V.380 4P

Shipping expected within 7 working days

ATURIA AQF 125x100x250X KW 9.2 V.380 4P ELECTRIC PUMP - (125X100X250X)

Expected shipping within 7 working days

PRODUCT IN STOCK

€4,436.65

€7,394.42

€3,636.60 Excl Taxes

E/PUMP ATURIA AQF 200x150x200Z KW 9.2 V.380 4P

Shipping expected within 7 working days

ATURIA ELECTROPOMPA AQF 200x150x200Z KW 9.2 V.380 4P - (200X150X200Z)

Expected shipping within 7 working days

PRODUCT IN STOCK

€6,719.76

€11,199.60

€5,508.00 Excl Taxes

Shipping expected within 7 working days

PEDROLLO F65/160C ELECTRIC PUMP V.380/415/660 - CENTRIFUGAL NORMALIZED - (4FN65158E)

Expected shipping within 7 working days

€1,573.80

€2,623.00

€1,290.00 Excl Taxes

BRAND

POWER (Kw)

POLI

SURFACE ELECTRIC PUMPS

E/ PUMP PEDROLLO 2CP40/200B 380-400/660-690/50 - (452CT420BE)

PEDROLLO F40/250C ELECTRIC PUMP V.380/415/660 - CENTRIFUGAL NORMALIZED - (4FN40250CE)

ELECTRIC PUMP PEDROLLO F50/250D 380-415/660- - (4FN50167E)

E/ PUMP ATURIA AQF 150x125x200X KW 9.2 V.380 4P - (150X125X200X)

ATURIA AQF 125x100x250X KW 9.2 V.380 4P ELECTRIC PUMP - (125X100X250X)

ATURIA ELECTROPOMPA AQF 200x150x200Z KW 9.2 V.380 4P - (200X150X200Z)

PEDROLLO F65/160C ELECTRIC PUMP V.380/415/660 - CENTRIFUGAL NORMALIZED - (4FN65158E)

© COMID SRL - P. IVA 01524521216

Information

General info

Customer Area